客户荣誉
kehury
技术文章
  • 临沂E-DWT Electronic Deadweight Tester Kits 6531 and 6532
  • 维氏硬度计选型注意事项
  • 辐射对人体的影响
  • 仪器和测量技术中的DSP
  • 电源专有名词
  • 雷达测速仪的特点
  • 振荡器的基本概念及工作原理介
  • 布氏硬度测量原理、计算公式及应用
  • 高精度单片数据采集系统MAX1400的原理及应用
  • 高低温试验箱故障解决
  • 临沭金扳手工程机械服务有限公司
    临沭县金泉工艺品有限公司
    临沂百邦标识设备有限公司
    临沂常泰工程机械有限公司
    临沂超威动力机械有限公司
    临沂大唐混凝土有限公司
    临沂东?矿山机械销售有限公司
    临沂东商净水设备有限公司
    临沂东岳压力容器设备制造有限公司
    临沂飞鹰激光钣金制品有限公司
    临沂缝纫用品厂
    临沂高新区喘宁电器专卖店
    临沂高新区振宁电器专卖店
    临沂广誉机械有限公司
    临沂桂平商贸有限公司
    临沂宏标装载机配件有限公司
    临沂宏盛商贸有限公司
    临沂华夏机械厂
    临沂华夏水塔厂
    临沂华耀电气自动化有限公司
    临沂华亿模具产业科创有限公司
    临沂惠尔佳机械有限公司
    临沂洁源锅炉有限公司
    临沂金盾钢锅厂
    临沂金盛机械有限公司
    临沂九州通给水设备有限公司
    临沂久力润滑油有限公司
    临沂炬联冷暖设备有限公司
    临沂俊成发动机配件厂
    临沂俊驰工程机械有限公司
    临沂铠亚机械有限公司
    临沂临山机械有限公司
    临沂鲁电数控机械有限公司
    临沂鲁信配电箱有限公司
    临沂罗奇净化设备有限公司
    临沂绿洲太阳能科技有限公司
    临沂美辰动力机械有限公司
    临沂蒙凌机械公司
    临沂孟立节能科技发展有限公司
    临沂欧派欧机械有限公司
    临沂批发城正正烟花爆竹专卖店
    临沂前锋机械有限公司
    临沂强鑫机电有限公司
    临沂清川机械有限公司
    临沂泉驿净水设备辅料有限公司
    临沂润明机械有限公司
    临沂赛思节能设备有限公司
    临沂商城付春峰信息配载中心
    临沂商城候艳丽信息配载中心
    临沂商城胡善坤信息配载中心
    临沂商城敬环信息配载中心
    临沂商城凌思荣信息配载中心
    临沂商城刘景辉信息配载中心
    临沂商城彭素娟信息配载中心
    临沂商城圣丰信息配载中心
    临沂商城孙运界信息配载中心
    临沂商城王景刚信息配载中心
    临沂商城王开亮信息配载中心
    临沂商城王克新信息配载中心
    临沂商城王兴玲信息配载中心
    临沂商城王兆夫塑料模具商行
    临沂商城武绍银信息配载中心
    临沂商城赢洪霞信息配载中心
    临沂商城袁小宝信息配载中心
    临沂商城张秀芳信息配载中心
    临沂商城赵洪英信息配载中心
    临沂商城赵西杰信息配载中心
    临沂商城赵修勇信息配载中心
    临沂胜捷消防设备有限公司
    临沂盛业刀具制造厂
    临沂市驰鹏机械制造有限公司
    临沂市光伏发电电子有限公司
    临沂市海金龙机械制造有限公司
    临沂市河东区华顺输送设备厂
    临沂市河东区鲁义机械厂
    临沂市河东区兴业五金工具厂
    临沂市恒广机械有限公司
    临沂市宏运三轮车棚厂
    临沂市君美机械有限公司
    临沂市兰山区诚信太阳能管件批发商行
    临沂市兰山区驰飞购物中心
    临沂市兰山区迪昂植保机械经销中心
    临沂市兰山区富贵太阳能经销中心
    临沂市兰山区海淮购物中心
    临沂市兰山区华兴购物中心
    临沂市兰山区刘春燕太阳能销售店
    临沂市兰山区美达丝印材料商行
    临沂市兰山区明富烟花爆竹专卖店
    临沂市兰山区乾元太阳能销售部
    临沂市兰山区三合烟花爆竹专卖店
    临沂市兰山区松锣肉制品专卖店
    临沂市兰山区天意缘琥珀专卖店
    临沂市兰山区翔龙焊接部
    临沂市兰山区象梅烟花爆竹专卖店
    临沂市兰山区鑫顺太阳能配件商行
    临沂市兰山区秀美烟花爆竹专卖店
    临沂市兰山区雅马哈电动车专卖店
    临沂市兰山区兆云机械销售部
    临沂市兰山区朕玮混凝土搅拌厂
    临沂市兰山区志德锅炉厂
    临沂市励志餐饮管理服务公司
    临沂市罗庄区鑫光耀配电箱厂
    临沂市物资回收公司
    临沂市谊首机械有限公司
    临沂市正阳机械有限公司
    临沂万强建筑工程机械有限公司
    临沂旺泉粮油机械有限公司
    临沂新搭档工具有限公司
    临沂鑫鼎泰机械制造有限公司
    临沂鑫久机械有限公司
    临沂易江红光伏有限公司
    临沂盈兴净化工程有限公司
    临沂永泰风机设备商行
    临沂永特机械贸易有限公司
    临沂元鼎步步紧配件五金商行
    临沂正大机械有限公司
    临沂正合热能设备有限公司
    临沂正阳锅炉厂
    临沂致拓勘测设计工程有限公司
    临沂卓杰机械有限公司
    罗庄区福音精密模具厂
    罗庄区海鼎精密模具厂
    罗庄区凯得利机械设备经销处
    罗庄区沂堂镇刘同力烟花爆竹专卖店
    绿森林科技木有限公司
    蒙阴艾凤理想茶叶专卖店
    蒙阴冠浩机械有限公司
    蒙阴金领机械加工厂
    蒙阴利豪麦饭石制品厂
    蒙阴县安乐预制厂
    蒙阴县富利来购物中心
    蒙阴县宏达机械厂
    蒙阴县金力达机械制造有限公司
    蒙阴县天昊农机销售中心
    蒙阴县文玉园林机械销售中心
    蒙阴县永友机械加工厂
    铭宇针织机械有限公司
    欧利斯五金焊接有限公司
    平邑县保太镇羊子农机服务部
    平邑县宏图工程机械销售有限公司
    平邑县腾月石材机械销售处
    平邑县沂蒙情土特产专卖店
    青岛市永胜昌风机有限公司
    三友信贷投资有限公司
    山东安顺工矿制造有限公司
    山东东岳机械集团有限公司
    山东福明机械厂
    山东恒盛隆建材销售公司
    山东慧迪自动化设备有限公司
    山东金山机械厂
    山东空心砖模具免烧砖模具厂
    山东临沂佰威机械有限公司
    山东临沂市永全气体有限公司
    山东临沂市正工金属制造有限公司
    山东临沂太阳能发电有限公司
    山东凌动工业机器有限公司
    山东六祥再生资源设备有限公司
    山东青山新能源科技有限公司
    山东全能环保科技有限公司
    山东融高管业有限公司
    山东商海节能材料科技有限公司
    山东省安顺钻探服务有限公司
    山东省临沂市河东区宝鼎柜业有限公司
    山东郯工液压科技有限公司
    山东腾辉数控设备有限公司
    山东银丰制冷设备有限公司
    山东玉丰机械厂
    山东重特机械有限公司
    深圳市宝安区石岩隆盛板材厂
    郯城县彬伟购物中心
    小茜碳化设备厂
    沂南县黛安娜十字绣专卖店
    沂南县东方鲁工模具加工厂
    沂南县豪阳货物配载中心
    沂南县君普太阳能销售部
    沂南县快达货物配载信息中心
    沂南县鲲鹏货物配载服务有限公司
    沂南县盛发清洗有限公司
    沂南县双赢冷藏厂
    沂南县允峰电动车专卖店
    沂南县正旺模具厂
    沂水北关街光明液压机械厂
    沂水恒诚风机厂
    沂水华强模具制造厂
    沂水世全农机维修服务部
    沂水县崔家峪生猪定点屠宰场
    沂水县东华电机维修部
    沂水县丰毅机械厂
    沂水县富达机械厂
    沂水县富官庄镇何家庄子预制厂
    沂水县兰国烟花爆竹专卖店
    沂水县梨行农机贸易有限公司
    沂水县圈里乡刘云平预制厂
    沂水县圈里乡启忠电脑专卖店
    沂水县盛茂农机维修部
    沂水县夏蔚镇海英烟花爆竹专卖店
    沂水县祥瑞机械厂
    沂水县信宇农机维修店
    沂水县杨庄镇博金手机专卖店
    沂水县永兵农机维修部
    沂水县增源机械有限公司
    当前位置:首页 > 临沂仪器仪表 > 临沂电子电工 > 临沂计量校准
    E-DWT Electronic Deadweight Tester Kits
    型 号:6531 and 6532
    品 牌:美国FLUKE
    技术指标:To RPM4-E-DWT:12 V dc 1.2 A
    临沂E-DWT Electronic Deadweight Tester Kits-6531 and 6532-美国FLUKE

    A powerful, complete hydraulic pressure calibration system to cover a wide workload

    Fluke Calibration improved the hydraulic pressure calibration process with the introduction of E-DWT-H electronic deadweight tester. E-DWT-H is an electronic calibrator designed to deliver traditional hydraulic deadweight tester performance with digital measurement features and convenience. Some improvements offered by E-DWT-H include:

    ·         No weights to load and unload, transport or send out for calibration

    ·         Provides real-time pressure indication with no need to know and correct for local gravity or ambient temperature

    ·         No piston-cylinder changes

    ·         No significant sensitivity to level or vibration

    ·         Able to set and read any pressure value exactly, no minimum increment limited by smallest available masses; perfect for applications that require setting a nominal pressure precisely on the device under test and measuring it, such as analog gauge calibration

    ·         Operates in any unit of measure, switching easily from one unit to the next

     The E-DWT-H is at home in metrology and calibration labs, on the production floor or in the field. It can operate with a wide selection of test mediums, including Sebacate calibration fluid, mineral oil, water and other liquids. ± 0.02 % of reading total one-year measurement uncertainty rivals the best laboratory deadweight testers.

    The E-DWT-H is used in the lab or instrument shop or can be taken into the field for performing in-situ calibrations and tests. This hydraulic pressure calibration system combines a high performance electronic reference pressure monitor and manually operated pressure generation and control hardware in a single, compact and rugged package. E-DWT-H offers the ease of use and precision of continuous, real time electronic pressure measurement with the simple and direct pressure control of high quality manual pressure hardware. E-DWT is named “electronic deadweight tester” because it is intended as a lightweight and easy to use, modern alternative to conventional piston-cylinder and weight based deadweight testers.

    The E-DWT’s electronic reference pressure monitor is a special version of RPM4, designated RPM4-E-DWT. RPM4-E-DWT can be configured with one or two high precision quartz reference pressure transducers (Q-RPTs) with ranges from 7 MPa (1 000 psi) to 200 MPa (30 000 psi).

    The RPM4-E-DWT is controlled locally by the operator using its front panel display, keypad and optional foot pedal or remotely by a computer using ASCII character command strings over its RS-232 interface.

    RPM4-E-DWT uses an AutoRange feature to automatically select the most appropriate Q-RPT and to optimize the E-DWT-H setup to cover the desired range of operation. When two Q-RPTs are included, a half-turn valve isolates and protects the Lo Q-RPT from high pressure when the Hi Q-RPT is in use. Visual and audible indicators assist the operator in setting the shut off valve correctly.

    The E-DWT-H includes the hardware necessary to fill and prime the system under test and generate and precisely adjust pressure up to 200 MPa (30 000 psi).

    The E-DWT-H can be powered with an optional battery/charger pack for use in locations where AC power is not readily available.

    High performance calibration made simple

    Fluke Calibration electronic deadweight tester kits feature E-DWT-H configurations combined with the accessories needed for a complete calibration system. Model 6531 options feature E-DWT-H configurations with a single quartz reference pressure transducer (Q-RPT) to offer percent of reading performance from 10 % to 100 % of device full scale. Model 6532 options feature an additional Q-RPT to maximize workload coverage, with percent of reading performance from 1 % to 100 % of device full scale. An included vacuum fill kit allows the E-DWT to be filled with your choice of compatible fluid, while eliminating problematic air pockets from the test circuit. Also included is a test station adapter to mount just about any pressure device to be tested without using PTFE tape or wrenches. 6531 and 6532 kits provide all you need to perform high level hydraulic pressure calibration right out of the box.

    ·         Pressure ranges available to 200 MPa (30,000 psi)

    ·         ± 0.02 % of reading total one-year accuracy, 0.025 % for two years

    ·         Low torque variable volume allows for pressure generation and control up to 200 MPa (30,000 psi) with minimal physical effort

    ·         Built-in priming system to fill system with test fluid and purge unwanted air to assure smooth operation

    ·         Unique test port design eliminates the need for PTFE tape or wrenches. Adapters included for 1/8 in, 1/4 in, 3/8 in and 1/2 in NPT, 1/8 in, 1/4 in, 3/8 in and 1/2 in BSP, M20 x 1.5 and M14 x 1.5 

    ·         Compatible with a wide range of liquids, including water. Vacuum fill kit included to fill the E-DWT with any compatible test medium

    ·         AutoTest™, AutoRange, ready/not ready indicator, onboard data capture and storage, overpressure alarm, RS-232 remote interface and other advanced features to simplify testing, improve safety and prevent calibration errors and damage to equipment

    ·         Optional foot switch accessory allows hands-free data collection when running AutoTests

    ·         Rechargeable battery pack and transport case options for field operation

    General

    Power requirements

    To RPM4-E-DWT:

    12 V dc 1.2 A

    To AC to DC power supply:

    100 V ac to 240 V ac, 50/60 Hz

    Temperature range

    Storage:

    - 20 °C to 70 °C

    Operating:

    10 °C to 40 °C

    Relative Humidity

    Storage:

    0 % to 100 %

    Operating:

    0 % to 70 %

    Weight

    1 Q-RPT:

    12 kg (26 lb) approximate

    2 Q-RPT:

    14 kg (30 lb) approximate

    Dimensions

    E-DWT footprint:

    41.4 cm W x 37.1 cm D (16.3 in x 14.6 in)

    E-DWT height:

    26.9 cm (10.6 in), 33.6 cm (13.2 in) to max variable volume handle height

    Pressure range

    Up to 200 MPa (30k psi), depending on configuration

    Operating medium

    All 6531 and 6532 E-DWT Kits are shipped dry, standard preparation. Can be filled with di-ethyl-hexyl sebacate, silicon oils, propylene glycol, fully fluorinated liquids, partially fluorinated liquids, isopropyl alcohol and distilled water or mineral oil.

    Reservoir capacity

    300 cc (18 in3)

    Variable volume displacement

    3 cc (0.18 in3), 200 MPa (30,000 psi) maximum

    Filling and priming pump displacement

    3.7 cc (0.23 in3)

    TEST pressure connection

    DH500 female, 200 MPa (30k psi) maximum working pressure. Adapters included for 1/8 in, 1/4 in, 3/8 in and 1/2 in NPT, 1/8 in, 1/4 in, 3/8 in and 1/2 in BSP, M20 x 1.5 and M14 x 1.5. Adapter maximum working pressure is 140 MPa (20k psi). Note: DH500 is a gland and collar type fitting for 6 mm (1/4 in) coned and left hand threaded tubes equivalent to AE F250C, HIP HF4, 9/16-18 UNF, etc.

    Pressure Limits

    Maximum Working Pressure:

    Range of RPM4-E-DWT monitor’s Hi Q-RPT

    Maximum priming pump pressure:

    700 kPa (100 psi)

    Maximum Working Pressure:

    with Lo Q-RPT selected: Range of RPM4-E-DWT monitor’s Lo Q-RPT

    Communication ports:

    RS-232 (COM1, COM2)

    ·

    Pressure measurement

    Warm up time

    15 minute temperature stabilization recommended from cold power up

    Normal Operating Temperature Range

    10 °C to 40 °C (50 °F to 104 °F)

    Resolution

    Default: 0.01 % of active range
    User adjustable to 1 ppm of Q-RPT maximum or 10 ppm of active AutoRange, whichever is larger

    Precision1

    ± 0.018 % of reading or 0.0018 % of Q-RPT span, whichever is greater

    Predicted Stability2

    One year:

    ± 0.0075 % of reading

    Two year:

    ± 0.015 % of reading

    Measurement Uncertainty3

    One year:

    ± 0.02 % of reading or 0.002 % of Q-RPT span, whichever is greater

    Two year:

    ± 0.025 % of reading or 0.0025 % of Q-RPT span, whichever is greater

    ·         1. Combined linearity, hysteresis, and repeatability. Precision does not include stability or calibration reference uncertainty.
    2. Predicted Q-RPT measurement stability limit (k=2) assuming regular use of AutoZero function and short term stability between rezeroing.
    3. Maximum deviation of the Q-RPT indication from the true value of applied pressure including precision, predicted stability with rezeroing, temperature effect from 10 oC to 40 oC and calibration uncertainty (assumes calibration reference uncertainty of ±0.005 % of reading, k=2), combined and expanded (k=2) following the ISO “Guide to the Expression of Uncertainty in Measurement.

    型号

    描述

    6531-7M

    E-DWT-H A7M, 0.7 to 7 MPa, 100 to 1,000 psi

    Includes:

    ·        E-DWT-H Electronic Deadweight Tester with power supply and operating manual

    ·        Vacuum liquid fill kit

    ·        Test station quick-mount fitting

    ·        NPT adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in

    ·        BSP adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in

    ·        Metric adapters: M20 x 1.5 and M14 x 1.5

    6531-14M

    E-DWT-H A14M, 1.4 to 14 MPa, 200 to 2,000 psi

    Includes:

    ·         E-DWT-H Electronic Deadweight Tester with power supply and operating manual Vacuum liquid fill kit

    ·        Test station quick-mount fitting

    ·        NPT adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in

    ·        BSP adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in

    ·        Metric adapters: M20 x 1.5 and M14 x 1.5

    6531-20M

    E-DWT-H A20M, 2 to 20 MPa, 300 to 3,000 psi

    Includes:

    ·         E-DWT-H Electronic Deadweight Tester with power supply and operating manual

    ·        Vacuum liquid fill kit

    ·        Test station quick-mount fitting

    ·        NPT adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in

    ·        BSP adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in

    ·        Metric adapters: M20 x 1.5 and M14 x 1.5

    6531-40M

    E-DWT-H A40M, 4 to 40 MPa, 600 to 6,000 psi

    Includes:

    ·         E-DWT-H Electronic Deadweight Tester with power supply and operating manual

    ·        Vacuum liquid fill kit

    ·        Test station quick-mount fitting

    ·        NPT adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in

    ·        BSP adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in

    ·        Metric adapters: M20 x 1.5 and M14 x 1.5

    6531-70M

    E-DWT-H A70M, 7 to 70 MPa, 1,000 to 10,000 psi

    Includes:

    ·         E-DWT-H Electronic Deadweight Tester with power supply and operating manual

    ·        Vacuum liquid fill kit

    ·        Test station quick-mount fitting

    ·        NPT adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in

    ·        BSP adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in

    ·        Metric adapters: M20 x 1.5 and M14 x 1.5

    6531-140M

    E-DWT-H A140M, 14 to 140 MPa, 2,000 to 20,000 psi

    Includes:

    ·         E-DWT-H Electronic Deadweight Tester with power supply and operating manual

    ·        Vacuum liquid fill kit

    ·        Test station quick-mount fitting

    ·        NPT adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in

    ·        BSP adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in

    ·        Metric adapters: M20 x 1.5 and M14 x 1.5

    6531-200M

    E-DWT-H A200M, 20 to 200 MPa, 3,000 to 30,000 psi

    Includes:

    ·         E-DWT-H Electronic Deadweight Tester with power supply and operating manual

    ·        Vacuum liquid fill kit

    ·        Test station quick-mount fitting

    ·        NPT adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in

    ·        BSP adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in

    ·        Metric adapters: M20 x 1.5 and M14 x 1.5

    6532-70M

    E-DWT-H A70M/A7M, 0.7 to 70 MPa, 100 to 10,000 psi

    Includes:

    ·         E-DWT-H Electronic Deadweight Tester with power supply and operating manual

    ·        Vacuum liquid fill kit

    ·        Test station quick-mount fitting

    ·        NPT adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in

    ·        BSP adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in

    ·        Metric adapters: M20 x 1.5 and M14 x 1.5

    6532-140M

    E-DWT-H A140M/A14M, 1.4 to 140 MPa, 200 to 20,000 psi

    Includes:

    ·        E-DWT-H Electronic Deadweight Tester with power supply and operating manual

    ·        Vacuum liquid fill kit

    ·        Test station quick-mount fitting

    ·        NPT adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in

    ·        BSP adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in

    ·        Metric adapters: M20 x 1.5 and M14 x 1.5

    6532-200M

    E-DWT-H A200M/A20M, 2 to 200 MPa, 300 to 30,000 psi

    Includes:

    ·        E-DWT-H Electronic Deadweight Tester with power supply and operating manual

    ·        Vacuum liquid fill kit

    ·        Test station quick-mount fitting

    ·        NPT adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in

    ·        BSP adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in

    ·        Metric adapters: M20 x 1.5 and M14 x 1.5

    通用配件:


    配件

    描述

    Case

    加固且可重复使用的模制装运外壳(部件号3338097)

    电池组/充电器

    带有充电器的12 VDC电池(部件号3071049)

    脚踏开关

    远程[ENTER]脚踏开关(部件号3070940)

    COMPASS for Pressure

    自动执行测试、数据采集、报告与设备资产管理的软件

     

    同类产品
    地址:青岛市崂山区海尔路29号温哥华花园5-1-401
    电话:0532-86069117 83812497 83821263
    传真:0532-88786387 网址:www.3017.cn
    青岛东方嘉仪电子科技有限公司 版权所有 备案号: 鲁ICP备08106748号